The wire rollers can be set for wire only or can be programmed for different tasks such as end opening.

For gold/silver products, raw material starting from 12 mm up to 0.10 mm It is an easy-to-use machine with thinning capacity.

It is used to bring the gold/silver wire to the desired dimensions by passing through the rolling mills is a calibration machine.

The hard structure of gold ore to the structure required for fine craftsmanship.

It is used for sizing gold and silver and cutting wrapped products.

It is used for model printing in all kinds of product manufacturing.

Semi-round, oval, dodge etc. It is the machine used to give the desired pattern and shape to various carnelian pipe chains.

It is used to bring the gold/silver wire to the desired dimensions by passing through the rolling mills is a calibration machine.

With this machine, Spraller can be made into rectangular, drop, etc. It can be produced in different shapes.

During the production of semi-finished products, it is necessary to open the ends of gold and carbonless iron and to remove the wall thickness of the gold.It is a machine for separating gold from iron after refining.

It is used to engrave the desired motifs on carnelian pipes.It is a very simple machine to use.

It is a machine for softening the products to obtain better quality surfaces.

It is used for sizing gold and silver and cutting wrapped products.It provides high level savings thanks to its special chamber.

Sizing gold/silver earrings in various sizes and used for all types of ring cuts.

Used to bring gold/silver wire to the desired dimensions by passing through rolling mills is a calibration machine.

Bracelet and cuff design, an important item in gold craftsmanship, is one of the most popular Screw and nested letter combination pattern prints from motifs in desired size and It is a machine used for printing at intervals.

Softening gold and silver metals of various sizes with the help of ammonia to obtain a cleaner surface and used in the process of boiling them together.

It is a machine for softening the products to obtain better quality surfaces.

The iron or copper that we put in the empty pipe for gold and silver products, is the machine used to separate gold and silver from gold and silver by acid.

It is used for the gold and silver encrustation of formed products (iron or tombaka).

It will allow you to comfortably use designs and motifs suitable for today's trends in gold craftsmanship is a system.

t is the machine used in the patterning process for rectangular and square carnelian tubes.

Gold and silver products in square and rectangular shapes from 0 to 12 millimeters It is the apparatus used for the measurement calibration and forming process of the products.

Halow Chains used in the patterning process, are molds available in various models

Ring mandrel used in manual winding machines.

Double coated cover with low external temperatures. Door contact switch with mandatory separation feature.

This machine uses a diamond cutting saw to precisely cut hollow and non-hollow pipes can cut in measurements.

Scores the surface of all flat materials such as triangles, squares, rectangles, in Gold and Silver products by varying the feed rate, diamond head type and number of cuts per minute  design can achieve.

- Emergency stop system - Pedal system (foot operation back and forth) optional - Horizontal body or vertical body system

Keeping your precious minerals out of the hands of your employees and your production losses a filter system and 3 holding tanks in order to minimize.

This precision drawing machine uses the tubes to draw the tubes into the required shape and thickness. is used.

All kinds of raw It is the system used for turning the products into pipes.